Provide Level meter that exceed your expectations!

Magnetic flap liquid level gauge is analysed the difference between the visual range and center distance

by:KAIDI     2020-09-02
Magnetic flap liquid level meter in the measurement process, there are several important concepts in visual range and center distance which is two important concepts, to illustrate the two * * the meaning of the corresponding terms and the difference between them, it is necessary for us * first to understand the concept. Magnetic level gauge turning center distance: means ( The vertical side) The upper flange center hole of the distance between the center hole of the bottom flange, and the center distance between the two flanges in general is refers to the range of level measurement range. Such as the liquid level measurement range is 3 meters. Then flange center distance is 3 meters. The length of the flange center distance does not represent the overall level gauge ( Height) 。 Calibration instructions with the flap length ( Height) A little bit longer (center distance than the flange More are part of the designer and the flap at the top of the parts) 。 Magnetic level gauge turning overall length than the center distance ( Level measurement range) Long. We can through the product structure is very clear, when the liquid level scale to 0 or ( Buoyancy principle) Dial 0 and float to the top to align with each other, and then the main pole way down to zero calibration extended, so that leaves float length ( The length of the float depends on the medium density) In the space. It is also as the level of full scale. But also be equipped with drain valve, drain valve operating space also want to consider the factors of the installation space. Visual distance is that you can see the liquid level measurement range, in other words, the magnetic level gauge turning visual range standard flange center distance is equivalent to or liquid level measurement range. If users have special requirements, of course, also could be longer, and he said, and special requirements, visual range ( Range), Can be better than the flange center distance ( The real measurement range) The tanks to 1 m, for example, requires measuring range range is 1 m, so the flange center distance is 1 meter off the ground at the bottom of tank to take into consideration here, of course, have enough distance to float length and drain valve operation space, if need to extend visual range at this time, also can be done. As long as in the production of liquid level meter, and extension the main body of magnetic level gauge turning pipe length and the calibration instructions to the length of the flap, and flange center distance remains the same, namely the upper flange and bottom flange installation is still in the 1 m tank top and bottom. Of course still considered here at the top of the space distance and the distance from the ground, at the bottom of the, because some occasions are indoors, especially indoor space problem in coping with the roof. And some places at the bottom of the tank is only a piece of steel plate thickness with the ground space, basic close to the ground. Such as gel chemical plant in shandong in my order for a magnetic level gauge, turning is 5 meters of tank, but due to the bottom of the group is only a steel plate distance from the ground, the space is not enough, so the flange center distance can only do 4 meters, 4 - The vertical side) That is to say from the bottom of the tank bottom flange and 60 cm distance to ensure that the float length and space of the drain valve) 。 As long as the top space is enough, 1 meter of tanks, 1 meter range range, the flap and body pipe can be extended to 1 m 5. Also said, calibration instructions the flap of the visual range into a 1 m 5. The to the particular case according to the customer site be flexible processing, the final purpose is to produce a magnetic flap liquid level gauge can not only meet the needs of the field measurement, and greater use of space. ( Instrument science and technology in this paper by embellish release, if you encounter any problems in the process of using the instrument, can call our domestic sales service hotline: 0517 - 86917118, we have * * personnel unriddling for you)
Service-based companies as Guangdong Kaidi Energy Technology Co., Ltd. are increasingly becoming more popular internationally.
We humbly ask you to use level gauge and we guarantee that you would be in a great delight with using the product.
The unique connections between level gaugemanufacturing and customers happen when you find ways to relate on a more personal and engaging level that goes beyond a product.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...