custom honeywell level transmitter company for work

Introduction

KMTL3000 Magnetostrictive Liquid Level Gauge adopts magnetostrictive principle. The output is an absolute value, does not require periodic re-calibration and maintenance. Series KMTL3000 provide customers with current, voltage, ModBus, Profibus and other signal output and provide effective solutions in different applications. It can be widely used to measure and control liquid level of various tanks in petroleum, chemical, water, pharmaceutical, beverage, food and other industries. It also can be applied in measurement and monitoring of hydrological measurements, water treatment and other environmental and industrial measurement process.

Feature

l Simple structure, easy for installation.

l No signal drift

l No need for periodic calibration or maintenance.

l High accuracy, no wearing parts and reliable and durable.

l Multiple choices of signal output mode

l Flexible cable types apply for the large range

Technical Parameter

Measurement range 300 to22200mm

Temperature range -196 ~ +427°C
Output type: 2-wire, 4-20mA (HART protocol can be selected.) ModBus, Profibus
Accuracy: 0. 1 %F. S. and±1mm
Power Supply: 18-36VDC
Explosion-proof: ExiaIICT6
Operating pressure: 0.6-32Mpa
Probe material: 304/316L /304+PTFE or FEP
Process connection: Thread or flange connection
Electrical interface: 1/2” NPT thread

Installation

l Be away from the material inlet and outlet as much as possible.

l To prevent the direct impact, a jacket pipe or baffle may be installed in the bottom of the tank.

l Minimum distance from the tank wall 300 mm

l Ensure that the protection pipe is vertical and the inner wall is smooth.

l Make sure that the liquid levels are identical inside and outside of the protection pipe of the tank.

l Ensure that the spacing between the pipe wall of the protection pipe and the float

l The installation of bypass pipe outside the tank

l Ensure that the spacing between the float and the wall is 15mm (hard pipe) or 30mm (flexible pipe).

l Ensure that the undulation, swing and rotation of the floating roof will not contact the liquid level gauge and float rigidly.

q******d

The inspections for Kaidi Sensors honeywell level transmitter fabrics have been conducted. The fabrics have been checked with regard to fabric softness, fabric width, fabric shrinkage, and knitting defects.

i******g

The quality of Kaidi Sensors honeywell level transmitter is judged with respect to various conditions. Color, shrinkage, durability, conformance, appearance, finishes, and sewing are done with great excellency.

p******v

Fabrics check of Kaidi Sensors honeywell level transmitter will cover a few aspects. The fabric width, length, appearance (weaving quality, splices, odors), safety, and properties are all checked to comply with the relevant standards and regulations.

q******e

The design of Kaidi Sensors honeywell level transmitter takes many garment properties into consideration. These properties are heat and moisture management (breathability, heat insulation, sweat transport), cooling and warming characteristics, range of utility and/or skin sensitivity, etc.

r******m

The fabrics used in Kaidi Sensors honeywell level transmitter comply with industrial standards. Their quality meets the regulations stipulated in FZ/T 01053 and GB/T 29862.

s******x

honeywell level transmitter It has excellent cold resistance and can maintain flexibility even at lower temperatures. It is suitable for storing and transporting commodities in cold environments.

Product Message

*Name

Phone

*E-mail

*Content

KAIDI custom honeywell level transmitter company for work