loading
Home   |   INFO CENTER   |   NEWS   |  

All in 10 seconds 3D Radar Scanning Robot Newly Upgraded

Home  >  INFO CENTER  >  NEWS  > 

All in 10 seconds 3D Radar Scanning Robot Newly Upgraded

All in 10 seconds 3D Radar Scanning Robot Newly Upgraded

2024-12-25

news-Kaidi Sensors-All in 10 seconds 3D Radar Scanning Robot Newly Upgraded-img

In the silo management process have you also encountered the above situation?

Is it because of the in and out of the material speed is too fast dusty foggy material level unevenness caused by the inability to accurately capture the data of the material information and troubled?

After visiting several sites, the R&D engineers gained a deep understanding of the impact of these challenges on silo management. This led to a new upgrade of the previously developed 3D radar scanning robot.

news-All in 10 seconds 3D Radar Scanning Robot Newly Upgraded-Kaidi Sensors-img

I. Fast scanning speed 

Newly upgraded 3D radar scanning robot adopts 140GHz high-frequency signal transmission combined with 16,200 high-precision scanning points to realize all-round scanning of silos and internal material surfaces.

news-Kaidi Sensors-All in 10 seconds 3D Radar Scanning Robot Newly Upgraded-img

                                                                                                                                                                                       In/Out Scanning Simulation


Through the internal horizontal rotation and tilt structure to drive the radar sensor for multi-dimensional rotation to quickly and comprehensively capture the material information in the silo as fast as 10 seconds to complete an all-round scanning “a hemisphere” area of the gaze and deferred scanning at the same time to solve the rapid response and scanning accuracy greatly improves the efficiency and accuracy of the silo management Combined with the Pro Inventory material information management system to realize 7 × 24h uninterrupted remote monitoring of the state of the silo real, intuitive restoration of the surface of the material morphology user-friendly, easy to operate can be viewed remotely through computers, cell phones, tablets and other mobile devices, Windows, Linux systems are compatible to ensure the stable operation and convenient management in different environments.

news-All in 10 seconds 3D Radar Scanning Robot Newly Upgraded-Kaidi Sensors-img-1

                                                                                                                                                               Material Information Management System Interface

II. No effect on harsh environments 

For high dust, high viscosity, fog and other harsh conditions the device uses 140GHz high-frequency millimeter wave radar and terahertz FM continuous wave technology can be covered in 1cm of dust without the need to clean up the dust and shut down real-time monitoring of incoming and outgoing materials to ensure real-time measurement and continuity of the work at the same time also has a high and low level alarms, temperature monitoring, self-calibration and other functions to enhance the safety of the silo monitoring.

news-Kaidi Sensors-img-1

                                                                                                                                                                       3D radar scanning robot under high adhesion

Built-in mechanical device using the same manufacturer of the domestic top robot arm to ensure the stability and durability of the equipment instrumentation built-in work status indicator even in a dim environment can be intuitively understand whether the equipment is normal or not!

news-Kaidi Sensors-All in 10 seconds 3D Radar Scanning Robot Newly Upgraded-img-2

In high-temperature conditions such as cement clinker storage, heat radiation and high temperatures can interfere with radar operation. Industrial 3d scanner scanning robots can be customized to support high temperatures. The use of heat shield components and optimized heat dissipation structures enable the equipment to operate stably in extreme high-temperature environments.

news-Kaidi Sensors-All in 10 seconds 3D Radar Scanning Robot Newly Upgraded-img-2

                                                                                                                                                                    3D Radar Scanning Robot with Thermal Barrier

looking forward

At present, 3D radar scanning robots have been widely used in grain, feed, cement, mining, metal smelting, power plants, coal, food and beverage production and other working conditions. Looking into the future, kaidi will still keep its original intention, along with the continuous progress of its own technology and the continuous expansion of the application scene, continue to lead the innovation of industrial measurement technology, contribute Chinese wisdom to the development of global industrial intelligence, and promote the development of industrial automation in the direction of more efficient and smarter.

Chat Online 编辑模式下无法使用
Leave Your Message inputting...