new magnetrol gwr level transmitter supply for work

Company Advantages
1. The offered KAIDI is produced using advanced production technology that is adopted in the whole process. This product has been certified under CE and RoHS
2. It can be customized in a wide range of specifications according to intended applications. Its shape can be customized according to needs
3. The product is soft to touch. Necessary auxiliary treatment such as adding softening agents or softeners is conducted during the treatment of the material. The function of this product can be customized to meet the needs of liquids, granules, slurries, solids, and powder
4. The product features immunity to conducted disturbances. It has the ability to work under a disturbed electromagnetic environment with signals that exceed the tolerable voltage. It is suitable for extreme pressure conditions
5. The product features the desired safety. The metal materials used for electric conductors and insulating materials used for the prevention of accidental contact have been strictly controlled. This product is notable for its strong overload capacity

Product introduction

Ultrasonic level gauge (measuring material level, liquid level) is a non-contact, highly reliable, cost-effective, and easy-to-install and maintain level measuring instrument. It can meet most of the level measurement requirements without contacting the medium. It is a new generation of ultrasonic level meter that our company has developed after years of hard work and has completely independent property rights.

Debugging   

Because the installation environment of the instrument is different. Therefore, the ultrasonic level meter must know the basic conditions of the required measurement before working, such as: measuring range, zero point, full range and field conditions, etc. Therefore, the meter must be set up before measurement.

 

Technical parameters of integrated ultrasonic level gauge

Product display diagram

Installation guide

(1)Measuring liquid

 In the reservoir, generally speaking, the installation height of the meter should be determined according to the highest water level. You must pay attention to the distance between the highest water level and the probe. When the water level is low, there are objects at the bottom of the pool, and this edge should use a refraction plate. Block.

There is an obstacle at the bottom of the pool-use a baffle to refract

If there is a strong vortex or vortex in the container, such as the vortex caused by a stirrer or a strong chemical reaction, the measurement will be very difficult. The ideal way is: the sensor probe can be installed in the still tube or the bypass tube for measurement.

The surface of the medium fluctuates greatly-use a bypass tube or add a still tube to measure

(2)Common installation errors

①Bubbles: 

If the bubbles on the surface of the medium are large and the bubble layer is thick, it will cause measurement errors and even fail to receive the reflected ultrasonic waves. Please take measures to prevent air bubbles, or install the sensor in the bypass pipe for measurement.Other measuring instruments can also be used, such as radar level gauges, magnetostrictive level gauges.

②The sensor is installed in the wrong direction

If the sensor is not mounted on the surface of the medium, the measurement signal will be weakened. To ensure the best measurement effect, please align the axis of the sensor with the surface of the medium, which is perpendicular to the surface of the interface to be measured.

Company Features
1. Guangdong Kaidi Energy Technology Co., Ltd. is a top magnetrol gwr level transmitter provider and manufacturer with powerful R&D capability.
2. Guangdong Kaidi Energy Technology Co., Ltd. has solid technical strength and abundant engineering experience.
3. Guangdong Kaidi Energy Technology Co., Ltd. will be highly responsible to requirements of every customer. Get an offer!