Radar Level Meter

Home  > PRODUCT  > Radar Level Meter  > 

82 Radar submersible capacitive ultrasonic level transmitter price water level transmitter

这里可以自定义设置
82 Radar submersible capacitive ultrasonic level transmitter price water level transmitter
B站不支持收货地址
B站不支持库存规格
Outer Covering:
5-10 days
Process temperature:
1 SET
MOQ
1 SET
Payments:
TT, Paypal, Credit card, Western union
Shipping ways:
Express(DHL,Fedex,TNT,EMS,UPS)/Air/Sea
参数暂无数据
多属性暂无数据
B站不支持优惠卷

Add success, do you want to check your shopping cart?

暂无分享
B站不支持产品保障

GDRD82

 

Features: high accuracy; strong anti-interference ability, not subject to temperature

      Influence of degree, humidity and wind; installation, adjustment

      Trial and easy to use; low power consumption.

Should be used: suitable for highly corrosive liquids, steam, foam

 

Maximum range:  30m

Measurement accuracy:  ±2mm

Antenna material:   stainless steel 316L/PTFE diaphragm or stainless steel 316L/FEP diaphragm

Antenna structure:   pointed cone vibrator

Frequency range:  80GHz

Signal output:  420mA/HART

                     RS485/MODBUS protocol

Electric source:  Two-wire single cavity (420)mA (1230)VDC standard type

                                                             (1230) VDC intrinsic safety type

                     Four-wire single cavity (RS485) (927) VDC standard type

                                                             (24±10%) VDC intrinsically safe type

                     Four-wire two-chamber (420)mA 1825VDC standard type

                     Four-wire two-chamber (420)mA 24 VDC standard type

                                     

Detailed introduction:

GDRD82

License form

P Standard type (non-explosion-proof)

I Intrinsically safe type (Ex ia C T2T6 Ga)

G intrinsic safety + flameproof type (Ex d ia [ia Ga] C T2T6 Gb)

See note 1

Antenna type

DS (-40150) (-0.12.5)MPa 50mm lens diameter single-piece heat dissipation

DQ (-40200) (-0.12.5)MPa 50mm lens diameter multi-piece heat dissipation

ES (-40150) (-0.12.5)MPa 80mm lens diameter single-piece heat dissipation

EQ (-40200) (-0.12.5)MPa 80mm lens diameter multi-piece heat dissipation

See note 4

Lens material

A PTFE(-40200)

B FEP (-40150)

Installation method

FA flange DN50 PN16 GB/T9119-2000 stainless steel 316L

FB flange DN80 PN16 GB/T9119-2000 stainless steel 316L

FC flange DN100 PN16 GB/T9119-2000 stainless steel 316L

FD flange DN125 PN16 GB/T9119-2000 stainless steel 316L

FE flange DN150 PN16 GB/T9119-2000 stainless steel 316L

FX special customization

See note 3

Process seal

X None

Electronic components

B (420)mA/HART two-wire system (single cavity)

C (420)mA/24 VDC/HART four-wire system (two chambers)

C (420)mA/1825)VDC/HART four-wire system (two chambers)

R RS485/MODBUS protocol (single cavity)

X Special customization

See note 1

Enclosure rating

B Plastic PBT/IP66

A Aluminum ADC12/IP67

G Stainless steel 316L/IP67

D Aluminum two-chamber ADC12/IP67

H stainless steel two-chamber 316L/IP67

See note 1

Cable entry

M M20x1.5

N ½NPT

Display/programming

A programmer with Bluetooth

B Programmer without Bluetooth

C Remote display with Bluetooth

D Remote display without Bluetooth

X None

See note 2

 

 

Note:

1. Intrinsically safe instruments (Ex ia IIC T2T6 Ga) are limited to "B, R" electronic components; "A, B, G" housings.

2. Intrinsically safe + flameproof instrument (Ex d ia [ia Ga] C T2T6 Gb) is limited to "C, E" electronic components; "D, H" type housing.

3. Lens diameter 50mm, flange diameter minimum DN50, maximum DN100; lens diameter 80mm, flange diameter minimum DN80, maximum DN150.

4. Antenna form DQ and EQ can only use "A" type lens material.

 

caveat:

1. Intrinsically safe + explosion-proof instrument, the explosion-proof chamber is strictly forbidden to open the cover;

2. The non-metallic parts of the product casing have potential electrostatic charge to prevent the risk of ignition caused by friction and impact; contact with liquid media is strictly prohibited during installation and use; wipe with a damp cloth when cleaning.

3. When the shell contains aluminum ADC12 or plastic PBT, to prevent the risk of ignition caused by impact or friction.

4. During maintenance, the non-metallic parts of the product casing and antenna should avoid the risk of ignition caused by friction or impact.


Product Message
社媒暂无评论
Chat Online 编辑模式下无法使用
Chat Online inputting...
WhatsAPP图标